Tank and Bunkering Hose Softwall, 20 Bar
Heavy bunkering hose for oil installations and ships, where there are requirements for high tear and tensile strength. Suitable for both liquid media and solids. Coil length 61/122m.
Specifications
Configurations (2)
| # | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 21612-100 | 102 | 116 | 7 | 20 | 60 | 820 | 4 |
| 2 | 21612-125 | 127 | 143 | 8 | 20 | 60 | 1020 | 4.99 |
Note: Other parts or configurations may be available. Contact us for specific details. Listed weights are approximate. C.E.* — Contact Engineering.
More High Pressure Hoses
Chemical Delivery Hose, 27 Bar
Heavy duty conductive chemical delivery hose suitable for a wide range of chemical products
Heavy Duty Oil and Fuel S&D Hose, 20 Bar
Heavy duty suction and discharge hose for transport of mineral oil products and fuel mixtures with aromatic content up to 50%, suitable for offshore applications and constructed in compliance with ABS / DNV standards.
Oil and Fuel Delivery Hose, 20 Bar
Heavy duty discharge hose for transport of mineral oil products and fuel mixtures with aromatic content up to 50%, suitable for offshore applications. This hose is constructed in compliance with ABS / DNV standards.
Oil and Fuel Delivery Hose, 27 Bar
Heavy duty discharge hose for transport of mineral oil products and fuel mixtures with aromatic content up to 50%, suitable for offshore applications. This hose is constructed in compliance with ABS / DNV standards.
Potable Water Delivery Hose, 20 Bar
Delivery hose for transporting liquids and beverages, mostly used for tank applications, suitable for offshore purposes
Rig Supply Potable Water Hose Softwall, 20 Bar
High load potable water hose, soft wall. 4-ply high tensile textile cord with additional anti-static wire. Load at break 8 tons. Suitable for potable water and dry food material.
Rig Supply Potable Water Hose, 10 Bar
Wrapped mandrel built tube, produced on stainless steel mandrel. 2 polyester cord plies. Fabric patterned cover. For supply of non-oily edible foods, fresh water and potable water from supply vessel to offshore installation in pre-treated condition.
Rig Supply Silo Delivery Hose, 20 Bar
Heavy duty discharge hose for transport of abrasive media such as mud, cement, barite and sand, conductive and highly abrasion resistant tube compound, constructed in compliance with ABS / DNV standards.
Rig Supply Silo Suction and Discharge Hose, 20 Bar
Heavy duty suction and discharge hose for transport of abrasive media such as mud, cement, barite and sand, conductive and highly abrasion resistant tube compound, constructed in compliance with ABS / DNV standards.
Seawater Suction & Delivery Hose, 20 Bar
Seawater suction and delivery hose made from high temperature and ozone resistant synthetic rubber compound for use in offshore applications
Tank and Bunkering Hose Hardwall, 20 Bar
Heavy bunkering hose for oil installations and ships, where there are requirements for high tear and tensile strength. Suitable for both liquid media and solids. Coil length 61m.
Tank and Bunkering Hose Heavy Duty Softwall, 27 Bar
Heavy bunkering hose with 9 tons of tension for oil installations and ships, where there is a requirement for extremely high tear and tensile strength. Suitable for both liquid media and solids. Cover is 3.5× more durable than conventional rubber.
Phone
+47 51 64 49 50Address
Ljosheimsvegen 1
4050 Sola, Norway
Org. nr: 997 744 276